HOME › NEWS & RESOURCES

Resources

NEWS & RESOURCES
ARTICLE · Technical Article

Band Selection for Automatic Banding Machines

2026.10.12 | SYPAC Resource Center

The bundling quality of an automatic banding machine is 70% dependent on the band and 30% on the machine—but the premise is that the band and the machine must match. The logic of band selection is clear: first identify the machine’s sealing method and temperature window, then choose the material according to what is being bundled, and finally determine the model by referring to the machine model table. Typical symptoms of a wrong choice are: loose sealing, band jamming, excessively deep band marks, or coming loose with a single pull.

1. Step One: Identify the Machine’s Sealing Method

The sealing of banding machines is mainly divided into two types, which directly determine which bands can be used:

  • Heat sealing (hot-melt sealing): Melts and joins the two ends of the band by heating. Each band has its own operating temperature window (e.g., 110–120 ℃, 120–140 ℃, 140–160 ℃); the machine temperature must fall within the window for a firm seal.
  • Ultrasonic sealing: Melts and joins by ultrasonic vibration, commonly found in banknote processing equipment (such as Delalue, G&D), and requires dedicated ultrasonic-compatible bands.
Selection iron rule: First check the machine manual to confirm the sealing method and set temperature, then select the band. If the temperature window does not match, even the most expensive band will not seal firmly.

2. Step Two: Choose Material According to What Is Being Bundled

Material SeriesFeaturesSuitable for Bundling
PP filmTransparent, does not obscure packaging design, excellent heat sealing, thickness 50–120 μmGeneral items, gift boxes, promotional packaging, banknote bundling
PaperPrintable (up to 6 colors), good texture, tool-free easy tear (some models)Printed materials, pharmaceuticals and cosmetics, banknotes, brand display packaging
Anti-static PPAnti-static value maintained at 10⁹–10¹¹Electronic components, static-sensitive products
Pay special attention when bundling banknotes: banknote bundling machines have precise temperature window requirements—high-temperature type (140–160 ℃), medium-low temperature type (110–120 ℃), and ultra-low-temperature desktop type (80–90 ℃) each have corresponding models; see the quick reference table below.

3. Step Three: Match the Model to the Machine Type

The same band may perform completely differently on different machine models. When selecting, please provide the banding machine brand and model (such as Akebono, COM, Taipack, Bandall, CMICO, YUIL, Delalue, G&D, SUNPACK, etc.); matching by machine model is the shortest path to avoiding band jamming and poor sealing.

4. SYPAC Model Quick Reference

SeriesModelThickness (μm)Operating TemperatureApplicable Machine · Use
PP film24025110 ± 5> 130 ℃ / 2–3 sAkebono, COM, Taipack, etc.; general items, banknote bundling
24036120 ± 5> 130 ℃ / 2–3 sSame as above; thicker, firmer and stiffer
HF1500050 ± 5> 110 ℃ / 2–3 sBandall; thin, printable
HF2400080 ± 5> 110 ℃ / 2–3 sAkebono; thin, printable
Paper32601H115 ± 10140–160 ℃Banknote bundling machines; high-temperature type
32601LL115 ± 1580–90 ℃CMICO, YUIL ultra-low-temperature desktop banknote bundling machines
32601LS115 ± 10110–120 ℃Long fiber, stronger and tougher, medium-low temperature
32603125 ± 10120–140 ℃Akebono, COM, Taipack, etc.; general items, banknote bundling
32608140 ± 10120–140 ℃Same as above; Brown kraft, tool-free easy tear
Anti-static23036-AD100 ± 5> 130 ℃ / 2–3 sAkebono, COM, Taipack, etc.; heat sealing
CAP150150 ± 14Ultrasonic sealingDelalue, G&D
CAP200200 ± 14Ultrasonic sealingDelalue, G&D

※ Paper banding test conditions: pressure 222 kPa, 0.5 s, test width 30 mm. Physical property values are typical values and not guaranteed; for detailed specifications, please contact sales for TDS.

5. Three Common Misconceptions

  • Misconception 1: If it does not seal firmly, raise the temperature. Exceeding the upper limit of the window will burn the band, press deep band marks, or even melt through. First confirm the band’s temperature window before discussing machine adjustment.
  • Misconception 2: The thicker, the stronger. Thick bands have high stiffness but may not necessarily seal well—sealing strength depends on material and temperature matching, not thickness.
  • Misconception 3: Anti-static does not matter. When bundling electronic components, static from ordinary PP bands may damage components; the anti-static series (10⁹–10¹¹) is a hard requirement.
Need help with selection or requesting samples?
Tell us your banding machine brand and model, the items to be bundled, and production capacity requirements. The SYPAC sales team will recommend the corresponding model and provide samples for on-machine testing. Technical data sheets (TDS) are available upon request.

Kunshan · Dongguan · Taiwan · Vietnam | MATERIALS FOR A BETTER TOMORROW