HOME › NEWS & RESOURCES

Resources

NEWS & RESOURCES
ARTICLE · Technical Article

Comparing Between Paper and PET Fasteners collating Tape

2026.11.05 | SYPAC Resource Center

Fasteners Collating tape has only one job: to bond nails neatly into strips or coils and to break cleanly at the instant the nail gun fires. Paper and PET are two mature routes. Depending on nail form and wire specification, they are paired with different widths and substrate thicknesses to produce collated nail products for different application scenarios. A wrong choice can, at best, affect production smoothness; at worst, it can cause dropped nails, nail jams, debris clogging the gun, and uneven break edges—creating difficulties in use.

1. Conclusion First: A Comparison Table

Comparison ItemPaper Collating TapePET Collating Tape
SubstrateVirgin paper (kraft paper) · BrownHigh-quality PET · Transparent
Thickness Range200–360 μm (thicker, with stiffness)50–108 μm (thinner, high strength)
Heat Resistance> 170 ℃> 170 ℃
Break CharacteristicsBreaks easily, no debrisClean break, no nail jamming
Nail Type Examples34° paper strip nails, fence nails, joist hanger nailsSteel strip nails, 34° DA angled strip nails, carton-closing coil nails, C / D / M type nails, L cleats
Typical ScenariosWood structures, flooring and decoration, fencingSteel structures, carton closing, cages and industrial fastening

※ Width and coil length are customized according to nail form and wire specification; physical property values are typical values and not guaranteed.

2. Common Product Types and Application Scenarios

  • 34° paper strip nails: The mainstream nail type for wood structures and decoration. The paper strip has good stiffness and stable strip formation; it breaks easily on firing with no debris.
  • Fence nails: Large outdoor nails with wide spacing; a 295 μm-class paper strip is sufficient.
  • Joist hanger nails: A specialized nail type for connecting beams and brackets (joist hangers) in wood structures, often supplied in strips with paper or PET tape, depending on the nail gun and site habits.
  • Steel strip nails, 34° DA angled strip nails: Smooth nail bodies, tightly arranged; PET’s excellent metal adhesion is needed to hold them firmly.
  • Carton-closing coil nails: Must be thin—50 μm PET is both light and tacky, allowing smooth tape travel in carton-closing machines.
  • C / D / M type nails (chicken cages, hog rings): Ring fastening relies on strong adhesion to maintain the string; the industry mostly uses PET tape for stringing.
  • L cleats: L-shaped steel floor cleats for concealed fixing of solid wood flooring; after firing, the cleat legs bend into the flooring tongue and groove, leaving no nail marks; mostly supplied in strips with PET tape.

※ The tape selections mentioned above are common industry usage categories, not a direct correspondence between products and tape materials; related applications should be used as the selection criteria.

3. Hard Indicators Easily Overlooked

  • Clean firing: The ultimate test of collated nail tape is in the nail gun. Uneven breaks leave debris, and debris accumulating at the gun nozzle is the beginning of nail jams. During selection, be sure to conduct actual gun continuous-fire tests and observe the break edges and debris.
  • Wire surface treatment: The surface treatment of the wire metal is greatly related to tape adhesion; some coatings have poor adhesive affinity. As a responsible manufacturer, we generally remind customers to conduct relevant tests, and even recommend monthly retention observation, as a final check before products leave the factory.

4. SYPAC Model Quick Reference

SeriesModelThickness (μm)
Paper Hot-Melt32620200 ± 15
32624240 ± 15
32630-4290 ± 15
32634340 ± 15
32636360 ± 15
PET Hot-Melt32300108 ± 15
3264550 ± 15
3266585 ± 15
3268090 ± 15
32680CU90 ± 15

5. Common Misconceptions

  • Misconception 1: As long as the nails stick, it’s fine. Sticking is only the passing line; clean break edges and no debris on firing are the deciding factors for yield.
  • Misconception 2: Thickness can be chosen arbitrarily. Changing thickness for the same nail type changes both tape travel feel and break position; after changing thickness, the gun must be re-tested.
  • Misconception 3: One type of tape works for everything. Similar to the previous misconception, choosing only thickness while ignoring metal surface treatment characteristics. The function of tape is adhesion, but some surface treatments inherently have adhesion difficulties; thickness alone cannot effectively solve adhesion problems—in-depth understanding and rigorous testing are required.
Need help with selection or requesting samples?
Tell us your nail type, wire diameter, and surface treatment. The SYPAC sales team will recommend the corresponding model and provide samples for actual gun testing. Technical data sheets (TDS) are available upon request.

Kunshan · Dongguan · Taiwan · Vietnam | MATERIALS FOR A BETTER TOMORROW